NJ 222 ECM SKF thrust ball bearings

RoHS:6; Type:Ball; Rolling Element Material:Steel; Max. Allowed rpm(rpm):3500; Number of Raceway Ring Rows:Single Row; Holder Symbol:L1; Days to Ship:9 Days or more; Retainer Type:Momi removing; Preload Mark:C3; Bearing Style:Rubber Sealed;

S:7 mm; Weight:0.53 kg; J:97 mm; L:130 mm; C:12.8 kN; B:25 mm; Designation of bearing:US204-12G2T04; Recommended tightening torque for set screw:3.7 Nm; T max.:100 °C; H2:64 mm;

L1:47 mm; Designation of open end cover:SCO211-55; A:66 mm; Dz:110 mm; H2:125 mm; Designation of bearing:US211G2; N:M16; B:45.3 mm; S:11.8 mm; Designation of housing:PA211N-;

Width T(mm):15; Type:Bearings with Housin; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):20; Bearing Retained:Yes (with retaining; Shape:Bottom Mount; Height Indication:Height Selection; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Not Provided;

Bearing Retained:Yes (with retaining; Days to Ship:8 Days; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Flange O.D. H(φ):45; Holder Surface Treatment:Not Provided; Shape:Flanged Pilot Type; Bearing Part Number:6900; Width T(mm):11; Shape:Flanged Pilot Type;

d:240 mm; D:400 mm; Nlim:1,300 rpm; Min operating temperature, Tmin:-40 °C; Static load, C0:4,260 kN; Characteristic cage frequency, FTF:0.44 Hz; Y2:2.67; rs min:4 mm; Fatigue limit load, Cu:211 kN; Da max:383 mm;

Days to Ship:8 Days; Flange O.D. H(φ):72; Number of Bearings:Single; Holder Surface Treatment:Not Provided; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing I.D. d(mm):17; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea;

s1:27.8 mm; Z:26.6 mm; A:64 mm; A2:38 mm; N2:64 mm; B:55.6 mm; L:171 mm; Designation of bearing:UC211-32G2T04; T max.:100 °C; N:35mm;

Seals:VV (Non-Contact Rubb; Width T(mm):25; Holder Surface Treatment:Clear Anodize; Volume Discount:Available; Shape:Flange Type; Days to Ship:7 Days; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Housing Material:[Aluminum Alloy] 201;

L:95 mm; e:16 mm; Designation of bearing:UC205-15G2; Z:39.2 mm; S:14.3 mm; s1:17 mm; N:12mm; d:23.81 mm; Weight:0.85 kg; Recommended tightening torque for set screw:3.7 Nm;

d:50 mm; P 120°:121 kN; sealing FS:SC 210 FS; u:15 mm; m1:160 mm; Material of Housing:grey cast; P 150°:110 kN; diameter dowel pins:5 mm; n1:34 mm; V-ring option:V60A;

G:M6x1; A2:31 mm; e:15 mm; L:86 mm; Z:22 mm; Weight:0.4 kg; T max.:200 °C; s1:11 mm; B:22 mm; C0:4.78 kN;

e:19 mm; C0:15.2 kN; J:92 mm; T min.:-20 °C; A1:15 mm; N:14mm; A:34 mm; s1:21.45 mm; d:35 mm; Designation of bearing:UC207G2T20;

s1:13.5 mm; B:27 mm; C:14 kN; d:23.81 mm; Dz:60 mm; G:M6x1; Designation of open end cover:SCOU205-15; e:16 mm; C0:7.88 kN; L1:65 mm;

Oil Holes:3 mm; Outer rings PCD:83 mm; Dynamic Load Rating:18.9 kN; Chamfer:0.6 mm; Inner rings PCD:45 mm; Mounting Hole Size:4.5 mm; Mounting Hole Countersink Diameter:8 mm; Thread Size:M4; Mounting Hole Countersink Depth:4.4 mm; D:95 mm;